DC-2307 FLATBACK PAPER
7 mil (0.178MM) exclusive of liner - Flatback Paper coated on both sides with a high shear/very aggressive Natural
Rubber Resin Adhesive system that bonds well to almost any surface. White crepe paper liner allows for both
automatic and hand dispensing applications. 180° Peel Adhesion: 40 oz/in. - Quick Stick: 20 oz/in. Unwind: 11 oz/in.
Tensile Strength: 34 lbs/inch - Elongation: 3%. Conforms well to rough and irregular surfaces. Excellent for
INSTALLATION OF GOLF CLUB GRIPS. Mil. Spec.: A-A-180B, Type II, Class A (Replaces UU-T-91). 3" Neutral
Core/Carton. |
|
|
| 36YD (33M) |
| WIDTH |
RLS/CS |
| 1/4" |
6mm |
144 |
| 3/8" |
9mm |
96 |
| 1/2" |
12mm |
72 |
| 5/8" |
15mm |
60 |
| 3/4" |
19mm |
48 |
| 1" |
25mm |
36 |
| 1-1/2" |
38mm |
24 |
| 2" |
50mm |
24 |
| 3" |
75mm |
16 |
| 4" |
100mm |
12 |
| 6" |
150mm |
8 |
| 12" |
300mm |
4 |
| 56" |
1422mm |
LOG |
|
| Alternative to Anchor
#591; Tesa #4903; Shurtape #GG-200 & #DF-63 |
|
| DC-2306...Crepe Paper
6.0 mil (0.15mm) exclusive of liner. 4 mil high quality
saturated crepe paper coated on both sides with a medium tack, high shear synthetic
rubber based adhesive. White siliconized paper release
liner. Good adhesion to a variety of surfaces with excellent
repositionability characteristics. Suitable for general purpose
bonding applications. Special adhesive formulation makes this tape
excellent for holding wood cuts and dies with little to no residue upon
removal. Also works well for mounting golf club grip
handles. General purpose bonding of papers, films, fabrics,
etc. Adhesion: 60 oz/in. Holding power: 4000 minutes.
Tack (in.): 1.5. Tensile strength: 21 lbs/in. Elongation: 7%
at break. Application temperature: 60F to 120F. Temperature
range: 0F to 180F. |
|
|
|
36YD (33M) |
| 1/4" |
6mm |
144 |
| 3/8" |
9mm |
96 |
| 1/2" |
12mm |
72 |
| 3/4" |
19mm |
48 |
| 1" |
25mm |
36 |
| 1-1/2" |
38mm |
24 |
| 2" |
50mm |
24 |
| 3" |
75mm |
16 |
| 4" |
100mm |
12 |
| 6" |
150mm |
8 |
| 30" |
762mm |
LOG |
|
|
|
|
60YD (55M) |
| 1/4" |
6mm |
144 |
| 3/8" |
9mm |
96 |
| 1/2" |
12mm |
72 |
| 3/4" |
19mm |
48 |
| 1" |
25mm |
36 |
| 1-1/2" |
38mm |
24 |
| 2" |
50mm |
24 |
| 3" |
75mm |
16 |
| 4" |
100mm |
12 |
| 6" |
150mm |
8 |
| 30" |
762mm |
LOG |
|
| Alternative to Int'l Tape #Adchem
#262C; 3M #400. |
|
| DC-2308...Crepe Paper
8.0 mil (0.20mm) exclusive of liner. 6 mil high quality
saturated crepe paper, coated on both sides with a high tack, high shear synthetic
rubber based adhesive. Tape is wound on a 3.2 mil super
calendared, white siliconized paper release liner. Used for core
start-ups, splicing, holding, joining, attaching, mounting and laminating
where high shear and high tack are required. Good tack on irregular
surfaces. Works well in holding wood cuts and dies. Suitable
for mounting rubber or plastic printing plates. Adhesion: 110
oz/in. width. Elongation: 7% at break. Application
temperature: 60F to 120F. Temperature range: -5F to 180F. |
|
|
|
36YD (33M) |
| 1/4" |
6mm |
144 |
| 3/8" |
9mm |
96 |
| 1/2" |
12mm |
72 |
| 3/4" |
19mm |
48 |
| 1" |
25mm |
36 |
| 1-1/2" |
38mm |
24 |
| 2" |
50mm |
24 |
| 3" |
75mm |
16 |
| 4" |
100mm |
12 |
| 6" |
150mm |
8 |
| 30" |
762mm |
LOG |
|
|
60YD (55M) |
| 1/4" |
6mm |
144 |
| 3/8" |
9mm |
96 |
| 1/2" |
12mm |
72 |
| 3/4" |
19mm |
48 |
| 1" |
25mm |
36 |
| 1-1/2" |
38mm |
24 |
| 2" |
50mm |
24 |
| 3" |
75mm |
16 |
| 4" |
100mm |
12 |
| 6" |
150mm |
8 |
| 30" |
762mm |
LOG |
|
| Alternative to Int'l Tape #280. |
|
