|
| |
Vinyl Electrical Insulating Tapes
PRODUCT NUMBERS/SPECIFICATIONS
EL8AW-L
All Weather - Flame Retardant and Cold Resistant 8 mil (0.20MM) Black PVC Electrical Insulation Tape with
Synthetic Rubber Adhesive. Adhesion: 18 oz/inch - Dielectric Strength:
1100 V/mil. Dielectric Breakdown: 10,000V - Tensile: 21 lb/inch. Elongation:
250%. Temp. range: -10C to 80C. Individually cello-wrapped and labeled. 1-1/2" (38.1MM) UL362K Listed Core. |
|
|
| WIDTH X LENGTH |
RLS/CS |
| 3/4" (19mm) X
66' |
250 |
|
| Also sold in sub-packs
of 10 rolls. |
|
| |
|
|
|
EL85AW66-L
All Weather - Flame Retardant and Cold Resistant 8.5 mil (0.22MM) Black PVC Electrical Insulation Tape, matte
finish, non-corrosive adhesive. Adhesion: 18 oz/in. Dielectric Strength:
1100 V/mil. Dielectric Breakdown: 10,000V. Tensile: 21 lb/inch. Elongation:
250%. Temp. range: -10 C to 80C. Individually cello-wrapped & labeled.
Meets specifications MIL-I-24391C. 1 1/2 (38.1mm) UL362K listed
core. |
|
|
|
| 3/4" (19mm) x
66' |
100 |
| 48" (1230mm)
x 66' |
LOG |
|
|
| |
|
|
|
EL85AW66-B
All Weather - Flame Retardant and Cold Resistant 8.5 mil (0.22MM) Black PVC Electrical Insulation
Tape. Same specifications as above. These special widths are
slit to order, and are bulk packed, separated by silicone sheets. 1
1/2 (38.1mm) UL362K listed core. |
|
|
|
| 1/2" (12mm) x
66' |
288 |
| 1" (25mm) x
66' |
144 |
| 1 1/2" (38mm) |
96 |
| 2" (50mm) x
66' |
72 |
| 3" (75mm) x
66' |
48 |
|
|
Vinyl Harness Wrap Tape
| EL5-HW...
5 mil (0.127mm) Black SPVC Film with Rubber Based
Adhesive. For wrapping of harness wires. High elongation and
conformability. Dielectric strength: 1100 V/mil. Dielectric
breakdown: 5500 V. Tensile strength: 11 lbs/in. Adhesion: 14
oz/in. Unwind force: 25 oz/in. Elongation: 200%.
Cello-wrapped and bulk packed. 1 1/2" (38.1mm) core. |
|
|
|
Friction Tape
| CFT-15...
15mil (0.35mm) Friction Tape - Black Cotton Cloth
with no-corrosive Rubber Resin Adhesive. Its cloth backing makes
this tape easily hand-tearable and extremely conformable. Highly
resistant to humidity and galvanic corrosion. Holds tightly on rough
and irregular surfaces, its adhesive system will not dry out. Used
for insulation and to protect industrial harnesses and electrical wires
from physical damage caused by friction, for over wrapping low voltage
splices and general electrical maintenance jobs. Dielectric
strength: 1,000 V. Insulation class: 80C. Tensile strength 42
lbs/in. Elongation: 8%. Individually cello-wrapped (no label)
- 10 rolls per tube sleeve. |
|
|
|
| 3/4" x 60' |
100 |
| 1 1/2" x 60' |
50 |
| 2" x 60' |
40 |
| 3/4" x 82.5' |
50 |
|
|
-5-
| |
|
