|
| |
Striped Safety Warning Tapes
PRODUCT NUMBERS/SPECIFICATIONS
|
SST-718 (18 Yd.) & SST-736
(36 Yd.)
7 mil (0.175mm) Conformable Soft PVC Vinyl - Synthetic Rubber
Adhesive, self-extinguishing. Adhesion: 30 oz/in. Tensile Strength: 18
lbs/inch - Elongation: 160% at break. Temperature Resistance: -20°F to
+176°F. Will not corrode copper, brass, steel, or aluminum. For striping
& warning, marking of hazardous areas and exits to comply with OSHA
requirements per paragraph 1910.144 of the Federal Register. 3"
Neutral Core.
TYPICAL USES:
Black / Yellow
= Physical Hazard / Caution
Red / White =
Fire Equipment / First Aid
Black / White = Traffic / Housekeeping
Green / White = Decorative
Identification
|
|
|
|
|
|
18YD (54')
Black/Yellow,
Red/White & Black/White |
| WIDTH |
RLS/CS |
| 1/2" |
12.5mm |
96 |
| 3/4" |
19mm |
64 |
| 1" |
25mm |
48 |
| 2" |
50mm |
24 |
| 3" |
75mm |
16 |
| 4" |
100mm |
12 |
| 6" |
150mm |
8 |
| 48" |
1230mm |
LOG |
| 48" |
1230mm |
|
|
|
|
36 YD (108')
Black/Yellow,
Red/White & Black/White Green/White
|
| 1/2" |
12.5mm |
96 |
| 3/4" |
19mm |
64 |
| 1" |
25mm |
48 |
| 2" |
50mm |
24 |
| 3" |
75mm |
16 |
| 4" |
100mm |
12 |
| 6" |
150mm |
8 |
| 48" |
1230mm |
LOG |
| 49" |
1250mm |
2 |
| 48" |
1230mm |
40 |
|
|
| Alternative to 3M #5700
and #5702 |
|
| |
|
|
|
|
SST-918L (18 Yd.) & SST-936L
(36 Yd.)
9 mil (0.22mm). Laminated PVC. 6
mil film. 2 mil over-lamination. 0.78 mil Rubber Base Adhesive. Shiny
surface. Adhesion/Steel: 17 oz/inch. Tensile Strength: 20 lb/in.
Elongation: 120%. Resists oil, grease, solvents, moisture. Scuff
resistant. For marking fire equipment/exits, hazardous areas, and first
aid points. 3" Neutral Core.
COLORS:
18 & 36 Yd ...
Black/Yellow, Red/White, Black/White
18 Yd Only ...
Magenta/Yellow (for Radiation Hazards)
|
|
|
|
|
| 18YD (54') |
| 1" |
25mm |
48 |
| 2" |
50mm |
24 |
| 3" |
75mm |
16 |
| 4" |
100mm |
12 |
| 6" |
150mm |
8 |
| 49" |
1250mm |
2 |
|
|
|
36 YD (108')
| 1" |
25mm |
48 |
| 2" |
50mm |
24 |
| 3" |
75mm |
16 |
| 4" |
100mm |
12 |
| 6" |
150mm |
8 |
| 49" |
1250mm |
2 |
|
|
|
|
Vinyl Electroplating Tape
| PRODUCT NUMBER /
SPECIFICATIONS |
|
EPT-36... Vinyl Electroplating
Tape
Extremely conformable, durable and
highly resistant to oil, acid, alkalines and corrosive chemicals.
Excellent adhesion to metals and plastics. Meets Government Specifications
H-H-T-0025, Amendment 2. Color: Cream. 3" Neutral Core /
Carton.
|
Applications:
Used as a masking tape in electroplating
operations. Designed for use with PCB terminal zone contacts to prevent
penetration of chemicals during plating process; as a protection tape for
shot peening applications.
|
Specifications:
|
|
Backing
Adhesive
Total Thickness
Adhesion
Tensile Strength
Elongation
Operating temperature
|
Soft PVC (non-rigid vinyl)
Rubber Based
6.5 mil (0.16mm)
30 oz/inch
25 lbs/inch
200% at break
176°F (80°C) *
|
|
|
|
|
|
|
36 YD (33M) 108' |
| 1/2" |
12.5mm |
96 |
| 3/4" |
19mm |
64 |
| 1" |
25mm |
48 |
| 1-1/2" |
38mm |
32 |
| 2" |
50mm |
24 |
| 3" |
75mm |
16 |
| 41" |
1041mm |
LOG |
|
|
| Alternative to Permacel
#P-35; 3M #470;Patco #W1550 |
| *NOTE:
Do NOT peel off until temperature cools down to
140 deg. F to 158 deg. F (60 to 70 degrees Celsius) |
|
-3-
| |
|
